UV DTF plates are revolutionizing object customization by enabling precise, durable and aesthetic prints. Here is a simple guide to using these plates and creating your own designs on a variety of objects.
Materials needed:
- DTF UV boards.
- Scissors or cutter.
- Squeegee (optional).
- The object to be personalized.
Step 1: Prepare the visual
Cut out your visuals using scissors or a cutter according to the desired shape. Be precise for a neat result.
Step 2: Remove the transfer film
Turn your visual printed side down and carefully remove the transfer film.
Step 3: Apply the visual
As with a sticker, position your design on the desired object. Press gently with your fingers to make it adhere evenly.
Step 4: Remove the transparent film
Once the visual is in place, remove the transparent film by peeling it off. For best results, you can use a squeegee to remove any air bubbles.
Some practical advice:
- Choose a clean surface: Before applying your visual, clean the object well to prevent dust or grease from affecting adhesion.
- Test the position: Before removing the film, place the visual on the object to validate its placement.
- Be patient: Do not rush the application to avoid wrinkles or air bubbles.
Why choose DTF UV boards?
UV DTF plates offer unique flexibility to personalize a wide range of objects: mugs, phone cases, keychains, wooden objects, and much more. Resistant to scratches and the elements, they ensure a durable and professional finish.
With this guide, you are ready to exploit the full potential of UV DTF boards for your creative projects. Give it a try and let your imagination run wild!
